5 REASONS TO BE AN ONLINE SECURITY LOCK FOR VAN SHOP AND 5 REASONS YOU SHOULDN'T

5 Reasons To Be An Online Security Lock For Van Shop And 5 Reasons You Shouldn't

5 Reasons To Be An Online Security Lock For Van Shop And 5 Reasons You Shouldn't

Blog Article

Choosing the Right Security Lock For Your Van

Choosing the right security lock for your van could assist in stopping thieves and safeguard your cargo. Some locks are designed to allow DIY installation, but others might require assistance from a professional to ensure that they're properly installed and provide the best security.

Slam locks are perfect for couriers who make deliveries with multiple drops because they lock automatically when you slam the door shut. Deadlocks work in tandem with the lock that you have purchased from the manufacturer and offer an additional layer of protection.

Dead Locks

Van dead locks provide an additional security measure to deter criminals. These aftermarket locks are specially designed and extend through the door of the van. They attach to the frame so they can't be opened without a key. These locks are ideal for vans that must be parked overnight, or those that carry expensive equipment.

They're great for those who are comfortable using the remote locking system that comes with the factory during the day but wish to add an extra layer of security in the night or if they feel their vehicle is in a vulnerable area. When controlled by a key, they throw a bolt into a receiver attached to the opposite body part of the vehicle. This provides an extra layer of security over the locks that are factory installed.

Unlike Slam locks and Hook Locks (both available in our online store) that lock automatically when the door is shut These locks require the driver to manually operate using the key supplied. A straight bar lock can be used on the rear of doors as well as twin sliding doors, whereas hook locks are suitable for the front and rear doors of small to medium-sized vans.

Both are designed to prevent a thief from attempting to break into the lock and forcing it open and allow them access to the vehicle's cab or load area. These locks are designed specifically for each van model and placed to offer additional protection against specific attack methods.

The consequences of theft can be significant for van owners as well as users particularly professionals such as tradespeople and contractors who depend on their vehicles for essential tools and equipment that they cannot afford to lose. It is costly to replace stolen goods, but it can cause loss of income because of unplanned interruptions or the hassle of finding alternative transportation. Installing a top-quality van lock can help to protect your valuables and deter thieves while reducing the risk of loss and may help you save money on insurance premiums.

Hook Locks

A hook lock is an effective deterrent to theft for vans. It fits on the door of your vehicle. It operates independently from manufacturer's locks and can only be operated by a single key under full control of the driver. It has a hook-shaped bolt that cannot be forced to open and is constructed from top-quality materials. It is also extremely resistant to manipulation and drilling. A lot of models are designed to meet police-approved specifications and have been approved by Sold Secure, the UK's most trusted testing agency for security products.

When you are looking to purchase security locks for your vehicle, you need to consider how much protection you need. For example, if you carry expensive tools or sensitive cargo, a more advanced lock, such as a slam or deadlock is more appropriate. If you're transporting items of a lesser value such as an ordinary slamlock could be sufficient. Additionally, you should always check the insurance policy of your service provider to ensure that additional locking mechanisms will not void your coverage.

Another aspect to consider when selecting the right security lock is its weather resistance. Since vans are often exposed to elements, your locks should be able to stand up to different weather conditions. This will ensure that they don't diminish their effectiveness and make it easier for thieves to manipulate. Moreover, you should also ensure that you are up-to-date with software updates for electronic locking systems to avoid security issues and improve their efficiency.

It's important to choose a lock which is easy to install. Some locks are made for DIY installation, while others require professional installation to ensure that they're installed properly and work in the way they were intended to. Your level of expertise, confidence and the resources you have will determine whether or not you require a professional to install the product.

Catalytic converter locks

Catalytic converters help reduce harmful emissions from your car. However, this crucial component is also a target for thieves due to of the precious metals it carries. The black market value of these precious materials has led to an increase in the theft of converters. Luckily you can take preventive measures to combat this issue.

Many people think that an alarm system of any kind can do the trick however, these systems are less effective than a dedicated device designed specifically to safeguard your converter. These devices emit loud sounds to scare away thieves when they detect vibrations or heat. These devices are more similar to security systems than deterrents, and tend to cost more than standard locks.

The Cat Clamp converter lock, with a patent-pending design, is a tried and tested solution to prevent catalytic convert theft. This device is made from a stainless steel cable that runs between the converter and the frame of the vehicle. It is wrapped and locked up to seven times, making it extremely difficult for thieves to remove the converter. The unit can be set up in just 30 minutes, and it does not require drilling or welding. It is simple to install and is suitable on a range of vehicles, including automobiles, trucks, and SUVs.

A metal cage that covers the entire catalytic converter unit is a different option to safeguard it. It's not as easy as putting up a cage made of metal, but it does make the converter harder to steal. These plates can cost anywhere between $150 and $270 based on the manufacturer.

It is important to remember that no security system is perfect, but preemptive measures can significantly reduce the chance of theft. Taking the time to properly secure your van will keep you and your belongings secure, and could save you the expense of replacing a costly component. It is also a good idea to have your catalytic converter stamped with your VIN number to help identify it should it be recovered and check here sold.

Anti-Peel Kits

It is designed to guard against the well-known "Peel and steal" method, this solution is fitted to the front edge of the vehicles side load door. This increases the resistance of the door to 'peel-and-steal attacks by up to 300 percent. The L4V Anti-Peel Kit, in combination with a well-placed hook lock, reduces the chance that thieves could gain entry into your van through the side-loading door.

With new brash methods of van theft and crime increasing, it is imperative that additional van security is used. The 'peel-and-steal' technique is the most recent in van theft. Thieves are able to steal tools and items by pressing down on the doors with their knees, then bending, pulling, and closing them. This kind of thief has become commonplace, costing UK tradespeople thousands of pounds worth of tools and inventory.

Locks 4 Vans has launched an innovative high hook lock and anti peel kit that is designed to address this growing problem. The Anti-Peel Kit is fitted to the barn door of your Ford Custom reducing the chance of 'peel and steal' attacks by reinforcing the door's skin, and providing an additional layer of security. The high L4V hook locks are integrated into the door to reinforce the door and secure it in the event that the anti-peel plate is removed.

Online, you can order our anti-peel kit range and get it delivered to your van within several days. Our skilled engineers will install the items for you. We have installers in Greater Manchester and Tameside so can offer our services in areas like Manchester, Salford, Stockport, Ashton Under Lyne, Oldham and Rochdale.

If you'd like to know more information about improving the security of your van contact us today. We have a number of options to assist you in enhancing the security for your van, ranging from deadlocks to armour locks and even shielding to guard against puncture attacks.

Report this page